Shenzhen Koten Technology Co., Ltd.
Shenzhen Koten Technology Co., Ltd. Integrity, Unity, Dedication, and Sharing !
Add to Cart
Aba Track II interface RFID Reader 310V
Specification
· Aba Track II (Wiegand 26bits/ Wiegand34bits/RS485/RS232) Standard Format Data Output
· Less than 0.2 second Response Speed
· Less than 0.5 seconds Proximity Time Distance
· 2-15cm Proximity Range
· Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) and MF 1K Card (13.56 MHz Frequency)
· -25 to 75 Ambient Temperature, 10%-90% Ambient Humidity
· Built-in Antenna
· Built-in LED (Double Color LED)
· Built-in Loud Speaker (Buzzer)
· DC 12V Working Voltage, 70mA Working Current
· 100 Meters Communication Distance
· Real Time Data Transfer
· Black or White color
· ABS Case material, black resin for waterproof
· Size: 118*75*17(mm)
Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red: DC 5V-16V
Black: GND
Blue: D1
White: D0
Brown: BEEP
Green: LED
Yellow: Alarm
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.